The NESSIE is a super lightweight Lanyard Clip, which allows climbers convenient & efficient access to, and storage of, rope lanyards during their climb. The NESSIE enables climbers to easily store and release their lanyards without the need to repeatedly tie, un-tie...and re-tie daisy chains, all throughout their climb.
The durable NESSIE can be fitted to a convenient position on the waistband of a wide range of harnesses. When the climber is not using their lanyard, the lanyard connector can be quickly and easily clipped into the multi-connector aperture at the base of the NESSIE. Connectors can also be hooked over the top retention hook. The rope tail can then be pushed in between the durable fins on the spine of the NESSIE, creating up to four loops.
When the climber needs to use their lanyard again, the lanyard can be easily removed from the NESSIE by un-clipping/un-hooking the lanyard connectors and easily freeing as many (or as few) of the lanyard tail loops as required. It is not necessary for the climber to release the entire lanyard length each time, so it’s not necessary to re-stow the full lanyard length each time.
The NESSIE is designed for use with rope lanyards [max. diameter 13mm (0.5”)] , of any length [max 10kg (22lbs)] , and can be fitted to harness waist webbing of up to 50mm (2”) width.
Technical Information
Maximum Harness Webbing Width | 50mm (2”) |
Harness Attachment Fixture | Multi-use (and replaceable) Nyloc Screw |
Maximum Rope Diameter | 13mm (1/2”) |
Maximum Lanyard Weight | 10kg (22lbs) |
Weight (without lanyard/connectors) | 52g (1.8oz) |
Material | Polymer |
Recommended Temperature Range | 0°C to 45°C (32°F to 113°F) |
Standards | NOT for PPE |